Resources

Tip1: Preparation-
Before attaching the snowplow blade, clean and remove any debris or corrosion from the moldboard that might interfere with a tight assembly.

Tip 2: Repair-
The moldboard acts as the support for the cutting edge. If the moldboard has been shortened from wear and tear, the backward blade torque will be increased, resulting in bolt and blade damage and/or breakage.

Tip 3: Bolts-
Use Grade 8 Plow Bolts- Our Grade 8 heavy-duty domed head design made of alloy steel is proven to have an excellent strength to toughness ratio. With the square neck and counter sunk head design, our bolts will hold your blade firmly in place and distribute the load over a larger area.

To reduce bolt failure and blade chatter, use Number 3 head plow bolts with self-locking nuts.

Tip 4: Nuts-
Use Grade 8 Nuts- Our Grade 8 Nuts are hardened to prevent flattening in use. Lock Nuts lock to the bolt (preferred).

*If using standard Grade 8 nuts, double up!

Tip 5: No Lock Washers-
Lock washers are harder than the moldboard. If used, they will gouge the backside of the snowplow moldboard. These washers act as a cutting tool causing unwanted metal shards on the moldboard, and no matter how hard you tighten the nut, the metal shards will flatten. This causes the nut to loosen and will eventually shave/cut off the bolt. The hardened lock nut will prevent this from happening.

Tip 6: Proper Torque Requirements-
Over-torque- causes heads to pop off. Under-torque shears the bolts due to moving blades during use.

Read 306673 times
Rate this item
(0 votes)

3511 comments

  • Abe
    Abe Tuesday, 16 October 2018 14:31 Comment Link

    Great blog you have got here.. It's difficult to find good quality writing like yours these days.

    I seriously appreciate people like you! Take care!!

  • Shayne
    Shayne Tuesday, 16 October 2018 05:07 Comment Link

    Thanks for one's marvelous posting! I truly enjoyed reading it, you happen to be a great author.I
    will be sure to bookmark your blog and will eventually
    come back at some point. I want to encourage yourself to continue your
    great posts, have a nice morning!

  • Victorina
    Victorina Monday, 15 October 2018 22:55 Comment Link

    Be both a helpful guide through complex issues and an informed judge when choices must be made.
    Understand the topic - While writing the essay, the very first thing you have to do is usually to define the subject.
    Remember that if you're new at college you'll only improve if you practice, so give your very best on each
    and every assignment as you will be giving you better academic way with words-at all
    with each one.

  • Felica
    Felica Monday, 15 October 2018 04:43 Comment Link

    This design is incredible! You definitely
    know how to keep a reader entertained. Between your wit
    and your videos, I was almost moved to start my own blog (well, almost...HaHa!) Excellent job.
    I really loved what you had to say, and more than that,
    how you presented it. Too cool!

  • Anabolika bestellen
    Anabolika bestellen Monday, 15 October 2018 03:03 Comment Link

    you're in reality a just right webmaster. The site loading pace is amazing.
    It kind of feels that you are doing any unique trick.
    Also, The contents are masterwork. you have done
    a great task in this matter! http://0rz.tw/create?url=http%3A%2F%2Fwww.powsolnet.com%2Findex.php%3Foption%3Dcom_k2%26view%3Ditemlist%26task%3Duser%26id%3D3609271

  • Margart
    Margart Monday, 15 October 2018 02:56 Comment Link

    Hi to every body, it's my first visit of this website; this weblog carries amazing and in fact fine material in favor of readers.

  • Delilah
    Delilah Sunday, 14 October 2018 23:56 Comment Link

    fantastic put up, very informative. I ponder why
    the opposite specialists of this sector do not realize this.
    You must proceed your writing. I'm sure, you've a great readers' base
    already!

  • Buddy
    Buddy Sunday, 14 October 2018 21:22 Comment Link

    Hmm is anyone else having problems with the
    images on this blog loading? I'm trying to find out if its a
    problem on my end or if it's the blog. Any suggestions would be greatly appreciated.

  • รับจัดเลี้ยง
    รับจัดเลี้ยง Sunday, 14 October 2018 21:21 Comment Link

    Thanks for your article on the travel industry. I'd personally also like contribute that if you're a senior considering traveling, its absolutely essential that you buy traveling insurance for retirees. When traveling, senior citizens are at greatest risk being in need of a health-related emergency. Receiving the right insurance plan package for the age group can protect your health and provide peace of mind.

  • EnvytaLyfe CBD Reviews
    EnvytaLyfe CBD Reviews Sunday, 14 October 2018 18:43 Comment Link

    Hi, I desire to subscribe for this web site to obtain most recent updates, so where can i do it please help out. http://acrp.in/index.php?option=com_k2&view=itemlist&task=user&id=736948

Leave a comment

Make sure you enter all the required information, indicated by an asterisk (*). HTML code is not allowed.

Evolution Edges
98 Philo Road West
Elmira, NY 14903
Phone: 800.733.5508
Fax: 607.732.5379

Connect with us

Recent Posts

Prev Next

Evolution Edges Announces New We…

The new and completely redesigned website offers visitors richer access to the company's innovative product line, parts and online catalogue.   FOR...

Read more

Technical Information - Carbide

Carbide Overview-It is a well known fact that carbide insert snow plow blades provide superior performance in terms of longevity...

Read more

Snowplow Blade Installation Tips

Tip1: Preparation-Before attaching the snowplow blade, clean and remove any debris or corrosion from the moldboard that might interfere with...

Read more

Evolution Edges introduces UNIQC…

Evolution Edges introduced its universal quick change scraper system, or UNIQCS, at the American Public Works Association (APWA) Public Works...

Read more